DDCSV3.1+Closed-Loop stepper motor Kits+Electronic Handwheel

1 x DDCSV3.1 CNC Offline Controller (3/4 Axis Optional)
1 x 4 Axis MPG handwheel
1 x 4GB USB Flash Disk
1 x USB Extension Cable Accessories
1 x Mounting bracket
1 x Handwheel Hook
3 x Closed loop driver
3 x Closed loop motor
3 x Motor extension cord
3 x Encoder extension cable

SKU: 10000318047700 Category:


DDCSV3.1 Product Description

DDCSV3.1 is 3 or 4 axis motion controller for stepper and servo systems. We are very proud of this product; it combines great power with a tiny footprint and is easy to use. After a very short time you will be familiar with the functions and this manual will help you. The highest output pulse per axis is 500 KHz. The pulse width is adjustable (refer to driver manual). The control period of each position is only 4 milliseconds. This provides high control precision for stepper motors and servo motors.


1) American and imperial units in the system can be converted; 2) Handwheel MPG master control page, file page and configuration page, extended keyboard can also operate and edit controller; 3) New trial cut function, single line processing, 4) The tool setting function is increased to 4 modes; 5) The software is greatly adjusted and optimized, and the parameter configuration is greatly increased to make the performance more powerful and reliable; 6) Controller language is Chinese/English/Russian

Closed-Loop Stepper Motor Product Description

Drive Model: JSSD2505M (Nema 23, for 57 stepper motor) Pulse Signal: 3.3V/5V/24V compatible. No string resistor required Voltage Range: DC16-50V Subdivision Setting: 800-51200 subdivision The new 32-bit DSP digital 57 closed-loop stepper motor driver, engraving machine, CNC equipment available. PWM current control, low noise, high speed torque is 40% larger than ordinary drives. Motor model: SSD257EC80E1 Motor current: 4A Output torque: 2.2N.m Body length: about 99MM Outlet mode: single output shaft Rated speed: 1000 rpm (no-load speed: 2000 rpm) Outlet mode: two-phase four-wire (must be wired according to motor label)


1): Full-closed control, the motor is equipped with 1000 line encoder, close to 100% torque output, subdivision setting range is 2-256, high speed response, high speed 2): Optical isolation fault alarm output interface ALM, current loop bandwidth (-3dB) 2KHz (typical), speed loop broadband 500Hz (typical) 3): Position loop broadband 200Hz (typical), can be downloaded or changed parameters with RS232 serial communication 4): overcurrent, I2T, overvoltage, undervoltage, overheating, overspeed, out of tolerance protection

Electronic Handwheel MPG Product Description

The CNC 4 Axis handheld controller MPG Pendant with x1, x10, x100 selectable, the MPG pendant for 4 axis CNC machine, it equipped with our popular machined MPG unit with 4axis and scale selector, LED indicator also send feedback from the CNC machine to user about the status of the unit.

Features :

– x1, x10, x100 switch – X,Y,Z,4th axis selector switch (5th, 6th) – LED indicator – High quality professional chassis – 6ft extendable high quality shielded cable cord – Magnetic base holder can place anywhere on the machine steel surface – Required 5V+, 150mA, power for MPG – Phase output is A ,/A and B,/B; – TTL output, drive capability +-20mA; Colour: Black Material: metal + plastic Resolution: 100PPR Power:5v Current:≤80mA Output Voltage:Output H is high level: VCC-2.5V Output is low and high level: ≤0.4v Axis:X,Y,Z,A Ratio:x1,x10,x100 Max response frequency:10Khz


There are no reviews yet.

Be the first to review “DDCSV3.1+Closed-Loop stepper motor Kits+Electronic Handwheel”